summaryrefslogtreecommitdiff
path: root/sux.c
AgeCommit message (Collapse)Author
2020-10-05- Added a routine for testing the SuB Suite'smrb0nk500
implementation of free(), although it's commented out. - Removed the sbc() function from the emulator, since sbc can be done by just inverting the second operand of adc.
2020-10-04- Added support for reading, and writing outside themrb0nk500
emulator's memory. All reads outside of the emulator's memory give back $/0xFF bytes, while all writes outside of the emulator's memory are ignored. - Implemented malloc(), and free() in the SuB Suite. In order to do this, I had to add support for a heap, which I did by reserving the first 3 banks of the address space (the first 192K), and by adding a routine that finds the end of the RAM. In this case, I set the starting address for the routine at bank 3 (bank 4 with one indexing), but, the routine's starting address isn't hardcoded, and thus, any starting address can be passed as an argument. The routine uses the fact that we can now read/write outside the emulator's memory, and also uses the fact that writing outside the emulator's memory will be ignored, and that reading outside the emulator's memory will always read $/0xFF bytes, and uses that to signal that it's reached the end of the RAM. - Added a test program for getting the size of RAM starting at address $/0x20000.
2020-09-24- Fixed some more bugs with struct, and union handling.mrb0nk500
2020-09-21- Fixed some issues with how structs, and unions weremrb0nk500
handled. - Added a function called fix_symtree(), which when called. will rearrange the symbol tree based on the order they're declared in by the token stream. The reason I wrote this, was to make sure the symbol tree could be printed correctly. - Optimized print_symtree() to now use tail recursion. - Started adding all of the SuB Suite's structs.
2020-09-18- Added support for structs, and unions to themrb0nk500
emulator's assembler. - Make the symbol table a doublely linked list, in both ways. - Optimized the memcopy() function. - Changed the benchmark timing, to now use a timer, and stops once the timer reaches zero. When the timer hits zero, it sends SIGALRM to the main function, which tells the emulator that the benchmark is done.
2020-08-30- Did some more work on SuBAsm's lexer.mrb0nk500
- Optimized the memory read, and write functions. - Made the emulator faster, and cleaner in general.
2020-08-17- Fixed some bugs in the emulator's assembler.mrb0nk500
- Simplified the effective address functions. - Made SuBEditor a bit faster. - JSR, and RTS now support using the RS prefix, which is used to specify the return address size, with an RS prefix of 0 being a return address size of 64 bits, rather than 8 bits.
2020-08-13Refactored get_addr(), and all of the effectivemrb0nk500
address handling. It's now all done using several functions for each addressing mode, with the result being the effective address. I did this to make the codebase cleaner, and more readable.
2020-08-12- Refactored the escape sequence parsing, and handling.mrb0nk500
It now uses a struct to store the escape sequence. Before it handles the escape sequence, it parses it, which includes things like getting any arguments that are supplied, and getting the mode type. - Moved the code that handles control codes to a separate function. The reason for doing this was because I wanted to make the escape sequence handling faster, but also make the code more readable at the same time. I got the idea to do this from st, a terminal emulator created by the suckless.org project.
2020-08-11Refactored the keyboard I/O emulation, again.mrb0nk500
I decided to use keypad now, and create a function to return the actual key sequences. The keyboard I/O is also now being handled by the io emulation function, and not by the main function. This should get rid of any possible deadlocks.
2020-08-10Refactored the keyboard I/O emulation.mrb0nk500
It now saves the characters of the typed key into a buffer, and returns each character in the buffer one at a time, until it reaches a null terminator, at which point it starts getting the next key. The reason for doing this was to make getting multi character keys faster, by not calling getch() for each character. The only downside to this is that I have to set a timeout() for getch(), making it somewhat non blocking, although the delay is 8 milliseconds. The next thing I'll probably be doing, is working more on the SuB suite.
2020-08-08- Refactored the opcode table, in order to make themrb0nk500
instruction formatting simpler. - Refactored the instruction table of the emulator's assembler, it now has two parts, the addressing mode bits, and the base value. The base value is what's used to generate the actual opcode, with the addressing mode bits telling the assembler what addressing modes this instruction supports. The reason for doing this was to use less space. For comparison, the previous version used 870 bytes for the instruction table, while the new version uses only 222 bytes. The new version is nearly 4 times smaller than the pervious version. - The B register based ALU instructions now use their own addressing mode, and are specified by using 'b' as the operand for those instructions. For example, to add the Accumulator with the B register, you now use "ADC B" instead of "AAB".
2020-08-08Did a ton of stuff.mrb0nk500
- Changed the file structure of the SuB Suite, so that all variable declarations, symbols, and constants are in a single file. - Moved the C library functionss into a separate file, and made them use stack frames. - Added support for using the emulator's assembler for realtime debugging, to enter it, get in to stepping mode by pressing Ctrl+s, press any other key, then press F1, The reason for having to press some other key before pressing F1 is because it only allows entering the assembler when the keyboard is not ready. - Added the ".res" directive to the emulator's assembler, the ".res" directive tells the assembler to reserve however many bytes specified by the operand. - Fixed some bugs in the emulator's assembler.
2020-07-08- Simplified some parts of the codebase.mrb0nk500
- Fixed some bugs with the push, and pull functions - Fixed a bug in the assembler.
2020-07-06- Implemented a new opcode table.mrb0nk500
- Added a new preifx called the OF prefix, which adds the contents of a specific register to the current operand. - Added a table generator, which parses opcode table csv files.
2020-06-22Did some more stuff.mrb0nk500
- Fixed some bugs in the emulator's assembler. - Worked on SuBAsm's lexer some more. - Created a new directory for the SuB suite, and moved all of the SuB suite's files in there.
2020-06-13Optimized, and cleaned up the codebase.mrb0nk500
2020-06-13Make the registers single 64 bit uints, and convertmrb0nk500
all the value getting, and setting into macros. This is to make the codebase cleaner.
2020-06-11Did some more stuff.mrb0nk500
- Fix some bugs with strings. - Started to refactor the instruction functions. - Added support for using RS prefixes on the memory based increment, and decrement instructions. - Started work on SuBAsm's lexer. Have fun looking at this, BieHDC. :)
2020-06-01Did some more refactoring to the assembler.mrb0nk500
- Refactored the symbol, and fixup table to now use a linked list - Added support for local symbols to the assembler. - Rewrote SuBEditor, and SuBAsm to use local symbols.
2020-05-29Make JSL, JSR absolute, and remove RTL.mrb0nk500
The reason for doing this was because JSL, and RTL are redundent, as they both do the same thing as JSR, and RTS.
2020-05-28Refactored the assembler, yet again, and implementedmrb0nk500
support for comma separated values. The assembler now uses a linked list of tokenized lines, each containing a linked list of tokens for that line. I also moved all of the large tables into the higher parts of memory, in order to free up the lower part of memory for the user. Comma sepparated values only work with directives, and only with the byte", word, dword, and qword directives. I also added support for getting the upper, and lower halves of an address. The tokens for both of those are '<', and '>' respectively.
2020-05-18Did alot of stuff while I was up at the family trailer.mrb0nk500
- Moved the large enums, and large tables into separate header files. - Added enums for implementing the base extension - Fixed a bug in the assembler. - Worked more on SuBAsm.
2020-05-06Removed some duplicate code in the assembler, and mademrb0nk500
the processor status register, a union now.
2020-05-04Made all address decoding, and memory reads/writes bemrb0nk500
done with a union, in order to make it more readable.
2020-05-03Put the instruction, and I/O routines into separatemrb0nk500
functions. I did this to make it more readable, while still making it fast, due to inlining it.
2020-04-27Added support for including source files to themrb0nk500
emulator's assembler. And removed three pointers, and the linewrap table from zero page, in SuBEditor. I moved the linewrap table to address $1000. And because of finally adding include support to the assembler, I can now start work on SuBAsm!
2020-04-19Removed most of the commented code, and optimized themrb0nk500
emulator some more. I optimized the emulator by replacing the main loop from a conditional while loop, to an unconditional for loop.
2020-04-17Made both the assembly language monitor, and themrb0nk500
emulator smaller, and faster. I am also starting to make SuBEditor's source code more readable.
2020-04-09Completely changed the assembler.mrb0nk500
It now has a lexer/tokenizer, along with a parser. I have also made the emulator even smaller.
2020-04-02Made the emulator less bloated, and faster.mrb0nk500
2020-03-24Added support in SuBEditor for true backspace, andmrb0nk500
inserting characters without replacing the old ones.
2020-03-17Revamped the opcode table, made the emulator moremrb0nk500
efficient, and ported SuBEditor to C. I revamped the opcode table to add another prefix bit for the addressing mode, finally giving access to all addresses, without wasting any bytes. I made the stack based operations more efficient, by sort of applying Duff's device to it. And I ported SuBEditor to C, to make it easier for me to figure out how to implement SuBAsm.
2020-03-05Optimize the emulator, even more.mrb0nk500
2020-02-20Finished SuBAsm's screen editor.mrb0nk500
Which I am now calling, SuBEditor.
2020-01-23Start optimizing the emulator.mrb0nk500
I also added a new input testing program called input-3.s, which contains a mostly working editor.
2020-01-10Added GPLv2.mrb0nk500
We're now Free Software!!!
2019-12-24Added support for Indirect addressing modes, and allowmrb0nk500
for use of the B register as an operand, for ALU based instructions. This allows for both low code size, and high performance. This means we can save upto 9 bytes, by just using the B register for ALU operations, rather than using a memory address. The indirect addressing modes, give Sux the abillity to now use pointers. Hope you guys have a Merry Christmas! From mr b0nk 500 <b0nk@b0nk.xyz>
2019-12-19Fixed some bugs in both the assembly languagemrb0nk500
monitor, and the cursor movement routines for SuBAsm.
2019-12-19Added the B register, which is used for storing themrb0nk500
remainder during a DIV instruction. I also added the TAB, and TBA instructions, for transfering between the Accumulator, and the B register.
2019-12-18Start work on SuBAsm.mrb0nk500
Also added support for moving the cursor arround.
2019-12-17Revamped how the keyboard works.mrb0nk500
It now does not use an interrupt, although, in the emulator, it does act like an interrupt, when the keypoll macro is set to 0.
2019-12-14We now have keyboard support!!!mrb0nk500
I also added the WAI instruction, which puts the thread that executed it, into a catatonic stat, where it can't do anything, until an interrupt occurs. I will be starting work on GFsuX next. I also might start work on SuBAsm, the Sux Bootstrapping Assembler.
2019-12-13Added support for specifying the number of bytes asmrb0nk500
the suffix. I added this because BieHDC said the already existing notation glowed in the dark too much.
2019-12-11We can print to the Screen!!!!mrb0nk500
I also added the ASR instruction, for doing arithmetic shifts, and have added a hello world program.
2019-12-08Added support for resolving fixup labels.mrb0nk500
AKA, referencing a label before it has been declared yet.
2019-12-07Added six instructions for transfering datamrb0nk500
between the three main registers. These instructions are: TAY: Transfer Accumulator to Y. TAX: Transfer Accumulator to X. TYX: Transfer Y to X. TYA: Transfer Y to Accumulator. TXA: Transfer X to Accumulator. TXY: Transfer X to Y.
2019-12-06Delete opcode.c, since I added all the functionsmrb0nk500
from it into sux.c.
2019-12-06Finally got multithreading support working!!mrb0nk500
I have also added a program that computes the Fibonacci sequence that I wrote in Sux assembly.
2019-12-03Start optimizing the emulator.mrb0nk500