| Age | Commit message (Collapse) | Author |
|---|
|
parse_quote().
This allows for replacing the string parsing code in
handle_directive() with a call to parse_quote().
|
|
greater than one are handled.
It wasn't getting the correct depth when relative
local symbols were used.
So to account for that, it adds the relative depth
(number of '@'s in a row), with the absolute depth
(number of '.'s), to get the true scope depth.
|
|
- Implemented support for the SIB addressing mode into
the assembler.
SIB is short for "Scale Index, and Base", and works
much like x86's version of SIB (scale*index+base),
although my version supports any scale value between
1, and 256.
- Redid the line shifting routine in SuBEditor.
It now uses memcpy, and memset to do that, and also
supports shifting the line left, or right by any
number of characters.
|
|
This is because the previous commit actually created
a bug, rather than fixing one.
- Added JMP, and JSR to the ortho extension, and
implemented them both in the assembler, and
emulator.
|
|
|
|
I was finally able to figure out how to implement the
expression parser into two functions.
It can be done in a single function, but I used two
functions to make it easier to read.
|
|
It's now separate from the lexer, and was designed to
make it both easier to understand, and easier to
parse.
|
|
- Started work on implementing the Super VIA emulation.
- Added support for disabling disassembly per
instruction, when in debug mode.
- Did some more work on rewriting the SuB Suite to
work with the new calling convention.
- Rewrote the symbol handling code in the emulator's
assembler, to make it both simpler, and to add
support for arbitrarily deep symbol scopes.
- Added support for arbitrarily deep local symbol
scopes.
For example, to declare a symbol of depth 2, you add
two '@' characters to the start of the symbol name.
In other words, the number of '@' characters before
the symbol name is what determines the scope of that
symbol.
And to use a symbol thats outside the current
scope, you would use the same syntax as using a
struct member, so you would do `global.local`.
|
|
assembler.
The main thing I had to do was implement the parsing
of the condition code token, but that wasn't hard to
do, since I had already done the lexing part already.
The next thing to do, will be to design a calling
convention for Sux.
|
|
both the assembler, and the emulator.
I finally figured out how I could get support for the
Ortho extension implemented into the old assembler.
The only reason for doing this, is to buy me some
while I start work on the new assembler, and to help
me get an idea for how to do the same in the new
assembler.
|
|
This is the biggest milestone I've reached for this
project, since the base extension changes alot about
what Sux can do by default, and now makes it a viable
instruction set for modern day use, when compared
with other instruction sets.
|
|
emulator's memory.
All reads outside of the emulator's memory give back
$/0xFF bytes, while all writes outside of the
emulator's memory are ignored.
- Implemented malloc(), and free() in the SuB Suite.
In order to do this, I had to add support for a heap,
which I did by reserving the first 3 banks of the
address space (the first 192K), and by adding a
routine that finds the end of the RAM.
In this case, I set the starting address for the
routine at bank 3 (bank 4 with one indexing), but,
the routine's starting address isn't hardcoded, and
thus, any starting address can be passed as an
argument.
The routine uses the fact that we can now read/write
outside the emulator's memory, and also uses the
fact that writing outside the emulator's memory will
be ignored, and that reading outside the emulator's
memory will always read $/0xFF bytes, and uses that
to signal that it's reached the end of the RAM.
- Added a test program for getting the size of RAM
starting at address $/0x20000.
|
|
|
|
handled.
- Added a function called fix_symtree(), which when
called. will rearrange the symbol tree based on the
order they're declared in by the token stream.
The reason I wrote this, was to make sure the symbol
tree could be printed correctly.
- Optimized print_symtree() to now use tail recursion.
- Started adding all of the SuB Suite's structs.
|
|
emulator's assembler.
- Make the symbol table a doublely linked list, in
both ways.
- Optimized the memcopy() function.
- Changed the benchmark timing, to now use a timer, and
stops once the timer reaches zero.
When the timer hits zero, it sends SIGALRM to the
main function, which tells the emulator that the
benchmark is done.
|
|
- Optimized the memory read, and write functions.
- Made the emulator faster, and cleaner in general.
|
|
- Simplified the effective address functions.
- Made SuBEditor a bit faster.
- JSR, and RTS now support using the RS prefix, which
is used to specify the return address size, with an
RS prefix of 0 being a return address size of 64
bits, rather than 8 bits.
|
|
spaces, and tabs before the current token.
Along with also now storing a sub-token count which
is used in case the token's secondary id is meant to
be treated as a sub-token.
- Added suppor for saving the number of blank lines
before the current tokenized line.
|
|
expressions to the emulator's assembler.
|
|
instruction formatting simpler.
- Refactored the instruction table of the emulator's
assembler, it now has two parts, the addressing mode
bits, and the base value.
The base value is what's used to generate the actual
opcode, with the addressing mode bits telling the
assembler what addressing modes this instruction
supports.
The reason for doing this was to use less space. For
comparison, the previous version used 870 bytes for
the instruction table, while the new version uses
only 222 bytes. The new version is nearly 4 times
smaller than the pervious version.
- The B register based ALU instructions now use their
own addressing mode, and are specified by using 'b'
as the operand for those instructions.
For example, to add the Accumulator with the B
register, you now use "ADC B" instead of "AAB".
|
|
- Changed the file structure of the SuB Suite, so that
all variable declarations, symbols, and constants
are in a single file.
- Moved the C library functionss into a separate
file, and made them use stack frames.
- Added support for using the emulator's assembler for
realtime debugging, to enter it, get in to stepping
mode by pressing Ctrl+s, press any other key, then
press F1,
The reason for having to press some other key before
pressing F1 is because it only allows entering the
assembler when the keyboard is not ready.
- Added the ".res" directive to the emulator's
assembler, the ".res" directive tells the assembler
to reserve however many bytes specified by the
operand.
- Fixed some bugs in the emulator's assembler.
|
|
- Added a new preifx called the OF prefix, which adds
the contents of a specific register to the current
operand.
- Added a table generator, which parses opcode table
csv files.
|
|
- Fixed some bugs in the emulator's assembler.
- Worked on SuBAsm's lexer some more.
- Created a new directory for the SuB suite, and moved
all of the SuB suite's files in there.
|
|
all the value getting, and setting into macros.
This is to make the codebase cleaner.
|
|
- Fix some bugs with strings.
- Started to refactor the instruction functions.
- Added support for using RS prefixes on the memory
based increment, and decrement instructions.
- Started work on SuBAsm's lexer.
Have fun looking at this, BieHDC. :)
|
|
- Refactored the symbol, and fixup table to now use a
linked list
- Added support for local symbols to the assembler.
- Rewrote SuBEditor, and SuBAsm to use local symbols.
|
|
code duplication.
The assembler now uses pre-tokens, which are smaller
tokens, that make up the larger tokens.
|
|
support for comma separated values.
The assembler now uses a linked list of tokenized
lines, each containing a linked list of tokens for
that line.
I also moved all of the large tables into the higher
parts of memory, in order to free up the lower part of
memory for the user.
Comma sepparated values only work with directives, and
only with the byte", word, dword, and qword directives.
I also added support for getting the upper, and lower
halves of an address. The tokens for both of those are
'<', and '>' respectively.
|
|
|
|
- Moved the large enums, and large tables into separate
header files.
- Added enums for implementing the base extension
- Fixed a bug in the assembler.
- Worked more on SuBAsm.
|
|
assembler.
Single quote marks works in the assembler just like
they do in C, except that it only supports a handful
of escaped characters, like '\n', and '\r'.
|
|
the processor status register, a union now.
|
|
emulator's assembler.
And removed three pointers, and the linewrap table
from zero page, in SuBEditor.
I moved the linewrap table to address $1000.
And because of finally adding include support to the
assembler, I can now start work on SuBAsm!
|
|
emulator some more.
I optimized the emulator by replacing the main loop
from a conditional while loop, to an unconditional for
loop.
|
|
emulator smaller, and faster.
I am also starting to make SuBEditor's source code
more readable.
|
|
It now has a lexer/tokenizer, along with a parser.
I have also made the emulator even smaller.
|
